|
(Pan Pacific Hotel, Whole Foods, Tutta Bella & Kootz Green Tea - Seattle, WA)

Placing a 2" core in the middle of banded post-tensioned cables

Placing a 5" core cutting one rebar in the clearly labeled rebar mat

Locating depths of PT cables, plastic water lines, rebar so they may chip and move plastic water lines

Placing a 2" core in the midst of PT cables and rebar
(Tacoma, WA)
See More Of The Esplanade

Placing two 4" and a 2" core in the midst of stud rails from a column, with cable in red
(Anthony's Home Port - Bremerton, WA)
- 100+ dowels
- 70 locations found for cores
- Elevator shaft installation

(Tension cables, in green, being set before pour)

(Tension cables and conduit)

(Banded tension cables, in green, before pour)

(Conduit, in white, curving under tension cables)
(Seattle, WA)

(Clearly labeled rebar and open 2" core locations)

(Clearly labeled Post-Tension cables (red), conduit (yellow) and bar (black)

(Clearly labeled conduit (yellow) and bar (black)
(Bellevue - Seattle, WA)
See More Pictures

(Clearly labeled rebar and core location)
(King County, WA)
See More Pictures

(Grant County, WA)

(Scanning concrete tube, locating rebar mat for doweling. Orange mark on right side identifies a rebar)

(Scanned dam wall, locating rebar mat for doweling. Orange marks identifies top rebar mat inside wall)

(Scanned dam floor, rebar pattern labled)

(Rebar located in turbine outflow)

(Rebar located, in turbine outflow, with exposed rebar shown)

(Scanning turbine outflow)
(Madras , OR)

(Labeling rebar mat, we scan in a variety of challenging conditions)

(Clearly labeled rebar mat of over flow wall for anchoring)
See More Of Hood Canal

(Clearly labeled rebar and core location)

(Scanning to locate conduit and a clear place to anchor)

(scanning support column)

(locating the rebar pattern in the bridge support for a 6"
electrical core)

(a screen shoot 'cross section' of the earth of where the capsule was placed)
|